U-value conventions in practice: Worked examples using BR 443
BRE (Building Research Establishment) is an independent, research-based consultancy, testing and training organisation, operating in the built environment and associated industries.
U-value conventions in practice: Worked examples using BR 443 was written by Sean Doran and published by BRE on 13 Jan 2012. The 36 page publication helps designers develop a better understanding of how to calculate U-values and kappa-values for use in calculation tools. See also Conventions for U-value calculations (2006 edition) BR 443.
U-values, (sometimes referred to as thermal transmittances) measured in W/m²K represent how effective elements of a buildings fabric are as insulators. That is, how effective they are at preventing heat from transmitting between the inside and outside of a building. The lower the U-value of an element of a building's fabric, the more slowly heat is able to transmit through it, and so the better it performs as an insulator.
Kappa values (sometimes referred to as thermal mass values) measured in kJ/m2K represent the heat capacity per square metre of a material. This is used to quantify the thermal mass of building elements such as walls and floors. The higher the kappa-value, the greater the thermal mass, that is the more heat the element is able to store.
These values are integral to the use of energy calculation tools such as the Standard Assessment Procedure (SAP) and the Simplified Building Energy Model (SBEM), which support Part L of the Building Regulations, Conservation of Fuel and Power. As a result, it is important that they are calculated reliably.
U-value conventions in practice:
- Supports the Building Regulations Part L and other legislation on the energy performance of buildings.
- Helps raise an awareness of and understanding of U-values and kappa-values.
- Encourages a unified, consistent approach to calculating U-values and kappa-values.
- Explains calculation methods using worked examples for wall, roof and floor designs.
- Supports training programmes for practitioners carrying out energy assessments and using U-value calculation software.
- Provides guidance about calculating U-values using standard simplified methods.
Its contents include:
- Introduction.
- Summary outline of the U-value calculation method.
- The worked examples.
- References and further reading.
[edit] Related articles on Designing Buildings
- Approved document L.
- BRE articles on Designing Buildings Wiki.
- Building regulations.
- Building Research Establishment.
- Conventions for calculating linear thermal transmittance and temperature factors.
- Conventions for U-value calculations (2006 edition) BR 443.
- Energy performance certificate.
- Insulation.
- Kappa value.
- PA ratio.
- Simplified Building Energy Model.
- Standard Assessment Procedure.
- Thermal bridge.
- Thermal mass.
- U value.
- What do design professionals need to know about U-value calculation conventions?
Featured articles and news
Future Homes Standard Essentials launched
Future Homes Hub launches new campaign to help the homebuilding sector prepare for the implementation of new building standards.
Building Safety recap February, 2026
Our regular run-down of key building safety related events of the month.
Planning reform: draft NPPF and industry responses.
Last chance to comment on proposed changes to the NPPF.
A Regency palace of colour and sensation. Book review.
Delayed, derailed and devalued
How the UK’s planning crisis is undermining British manufacturing.
How much does it cost to build a house?
A brief run down of key considerations from a London based practice.
The need for a National construction careers campaign
Highlighted by CIOB to cut unemployment, reduce skills gap and deliver on housing and infrastructure ambitions.
AI-Driven automation; reducing time, enhancing compliance
Sustainability; not just compliance but rethinking design, material selection, and the supply chains to support them.
Climate Resilience and Adaptation In the Built Environment
New CIOB Technical Information Sheet by Colin Booth, Professor of Smart and Sustainable Infrastructure.
Turning Enquiries into Profitable Construction Projects
Founder of Develop Coaching and author of Building Your Future; Greg Wilkes shares his insights.
IHBC Signpost: Poetry from concrete
Scotland’s fascinating historic concrete and brutalist architecture with the Engine Shed.
Demonstrating that apprenticeships work for business, people and Scotland’s economy.
Scottish parents prioritise construction and apprenticeships
CIOB data released for Scottish Apprenticeship Week shows construction as top potential career path.
From a Green to a White Paper and the proposal of a General Safety Requirement for construction products.
Creativity, conservation and craft at Barley Studio. Book review.
The challenge as PFI agreements come to an end
How construction deals with inherited assets built under long-term contracts.
Skills plan for engineering and building services
Comprehensive industry report highlights persistent skills challenges across the sector.
Choosing the right design team for a D&B Contract
An architect explains the nature and needs of working within this common procurement route.
Statement from the Interim Chief Construction Advisor
Thouria Istephan; Architect and inquiry panel member outlines ongoing work, priorities and next steps.
Comments